Small Car Water Tank Blow Moulding Machine With Lubrication Pump SRB65-1 , Automobile Water Tank Blow Moulding Machine , Air Duct Vent Plastic Water Tank Manufacturing Machine
QUICK VIEWS
| 1. SRB65-1 is single station single head plastic water tank blow moulding machine for 5L as maximum. 2. Its output for 1L small automobile water tank is 100 Pcs/hour, for car air vent hose is 170-175 Pcs/hour. 3. Adopt pressure / flow double proportion control for hydraulic system, insure platen moving speed & smoothness. |
TECHNICAL PARAMETERS
| Machine Model | Single station extruder blowing machine |
| Max Product Volume | 5 L |
| Machine Weight | 4.5 Tons |
| Machine Size | 3.8 x 1.8 x 2.5 m |
| Screw Diameter | 65 mm |
| Plasticizing Capacity | 75 KG |
| Clamping Force | 68 KN |
| Platen Size | 320 x 390 mm |
| Platen Opening Stroke | 150~500 mm |
| Max Mould Size | 360 x 360 mm |
| Four Head Central Distance | 160 mm |
| Max Product Diameter or Width | 135 mm |
| Material Cutting Method | Hot Cutting |
| Max Die Diameter | 95 mm |
| Total Power | 41.5 KW |
| Average Energy Consumption | 26.5 KW |
MACHINE FEATURES
1. Control Unit: WISETECH total machine programmable controller controller and ture colorful touch panel. English parameter process setting, state monitoring and products counting are convenient and intuitionistic. PLC automatic temperature control model.
2. Hydraulic Unit: It adopts international famous Japan YUKEN brand hydraulic valve and seal, proportional control. And has features of high stationarity and reliability, accurate operation, long longevity, quick response and so on.
3. Extrusion Unit: Hard gear surface decelerator; famous Delta inverter adopts Italian technology; Screw speed regulation adopts variable-frequency speed regulation control system. It has the features of stable rotate speed, powerful power, energy-saving and so on. Mixing screw has wide applicability to raw materials and the plasticization quality is even better. Energy-saving machine barrel and A-alloy heaters are adopted for heating
4. Die Head Unit: With single cylinder material-center-in accumulator head, is smooth and dependable. This die head adopts German technology and is made by special imported steel.
5. Clamping Unit: Adopts fixed mould open-closing system,fast and balanced.
PRODUCTION ARRANGEMENT
| 1. Machine Foundation Size: 3.5 x 2 m 2. Production Area: 6 x 5 m 3. Minimum Workshop Height: 3.0 m 4. Air Supply Requirement: 0.8m3/min, 0.6Mpa 5. Water Supply Requirement: 5 Tons 6. Machine Power Consumption: 27.5 KW 7. Production Line Power Consumption: 36.5 KW 8. Whole Line Electricity Arrangement: 100 Amps 9. Minimum Workers Number: 1~2 Workers |
