6 Heads Plastic Mold Machine , 250ml Juice Bottle Extruder Blowing Machine SRB80D-6 , Plastic Small Bottles Automatic Bottle Blowing Machine , 500ml Bottle Automatic Blow Molding Machine
QUICK VIEWS
| 1. SRB80D-6 is double station six head blow molding machine, specially used for 0~500ml small bottles. 2. Its output for 300ml round bottle is 2000 Pcs/hour, for 500ml round bottle is 1800 Pcs/hour. 3. Six head central distance is 85 mm, bottle width or diameter must be smaller than 70mm. |
TECHNICAL PARAMETERS
| Machine Model | Automatic Plastic Bottle Blowing Machine |
| Max Product Volume | 2 L |
| Machine Weight | 9.5 Tons |
| Machine Size | 4.5 x 3.8 x 2.7 m |
| Screw Diameter | 80 mm |
| Plasticizing Capacity | 110 KG |
| Clamping Force | 110 KN |
| Platen Size | 500 x 320 mm |
| Platen Opening Stroke | 150~380 mm |
| Max Mould Size | 520 x 300 mm |
| Six Head Central Distance | 85 mm |
| Max Product Diameter or Width | 70 mm |
| Material Cutting Method | Hot Cutting or Cold Cutting |
| Max Die Diameter | 30 mm |
| Total Power | 73.6 KW |
| Average Energy Consumption | 45 KW |
Click picture above to see SRB80D-6 production video
PRODUCTION FLOW
The working flow of 5L double station plastic container manufacturing machine production flow is basically like this. The PLC in the electronic control case sends the instruction, the hydraulic system receives the instruction, the fuel tank and the motor start to operate, drives the screw to run, and extrudes the embryo through the die head. The opening and closing mold begins to be closed, the needle is blown, cooled, and plastic products are formed.
MACHINE FEATURES
1. Control Unit: WISETECH total machine programmable controller controller and ture colorful touch panel. English parameter process setting, state monitoring and products counting are convenient and intuitionistic. PLC automatic temperature control model.
2. Hydraulic Unit: It adopts international famous Japan YUKEN brand hydraulic valve and seal, proportional control. And has features of high stationarity and reliability, accurate operation, long longevity, quick response and so on.
3. Extrusion Unit: Hard gear surface decelerator; famous Delta inverter adopts Italian technology; Screw speed regulation adopts variable-frequency speed regulation control system. It has the features of stable rotate speed, powerful power, energy-saving and so on. Mixing screw has wide applicability to raw materials and the plasticization quality is even better. Energy-saving machine barrel and A-alloy heaters are adopted for heating
4. Die Head Unit: With single cylinder material-center-in accumulator head, is smooth and dependable. This die head adopts German technology and is made by special imported steel.
5. Clamping Unit: Adopts fixed mould open-closing system,fast and balanced.
6. Blow Fitting Unit: Down blowing fitting is equipped.
7. Lifter Unit: Four turbine reducer liter, lifting balance, quick, stable.
8. Electrical Components: All of the electrical components are made in Japan and Taiwan.
MACHINE ADVANTAGES
1. Our continuous extrusion blow moulding machines cover 0~30L bottles, jerry cans, jars, containers, kettles, small toys, pipes and other hollow articles. Based on your capacity requirement, we can adopt single head, double head, triple head, four head and six head with good material runner design.
2. According to your demand of packing objects and cost control, our machine can be made with co-extrusion of 2~4 layers and view stripe line. The design concept of us to 0~30L machine is stable working performance, fast production speed, higher automatic degree and lower fault rate.
3. Total machine control system well match with scraps on-line deflashing, neck rotary cutting, in-mould labeling, leakage testing, product conveying & packing. Optimized hydraulic system with reasonable design to control pressure and flow of double proportion, acchieve action execution fast, stable and accurate. High hardness bimetallic screw with good structure design and modulation, insure bigger plasticizing capacity, less wearing and longer working lifespan.
4. Rich experience in whole producing line arrangement and layout, totally automatic running from material feeding to finished product packing. Colorful touch screen, aluminum cantilever operation box, bottle collective guidance shelves, scraps sliding channel and safety protection are included.
